Define the part before work begins
A clear purpose, dimensions and connection details make the enquiry useful. Distinguish essential tolerances from appearance preferences so the requested outcome can be understood before quoting.
Wardale Engineering · Lincolnshire
Stainless Steel Fabrication in Lincoln
General and bespoke stainless workshop fabrication with a free custom quote. Explain the part, its purpose and the dimensions you need, and discuss the work directly with Tom, a qualified, coded welder.
Request My Free QuoteFree custom quote
14 years’ welding experience · Speak directly to Tom
14 Years
Professional welding
NVQ Level 3
Welding & fabrication
Coded Welder
Thin-wall stainless tube
£2m Insured
Public liability
By Appointment
Deal directly with Tom
The service
A practical workshop service for a defined requirement
Stainless steel fabrication is the making or joining of components to an agreed design and purpose. Wardale Engineering offers general and bespoke workshop fabrication alongside custom exhaust builds. The useful starting point is the item you need, where it will be used and what it must do, rather than a broad request for “something in stainless”. A drawing, measurements or reference item can help turn that requirement into a clear discussion.
This service can be relevant when a replacement is unavailable, a component needs an unusual shape or a project requires a made-to-measure part. Domestic and commercial enquiries may have different documentation and use requirements; describe yours instead of assuming that a workshop fabrication service includes every specialist certification. The supplied brief does not confirm food-contact, pressure-vessel, structural design or regulated-system approvals for general fabrication work.
Tom has 14 years of professional welding experience, including industrial pipe welding, an NVQ Level 3 in Welding and Fabrication and certified thin-wall stainless tube codings. These are confirmed credentials, but a coding should not be interpreted as covering every material, joint or regulated application. Share the application and requirements so suitability can be discussed. All custom quotes are free, and no general fabrication rate or minimum charge has been supplied.
Get the brief right
An accurate drawing is cheaper than an avoidable remake
A part can look correct and still be unsuitable if dimensions, connections or operating conditions are missing from the brief. Before commissioning it, establish which measurements are critical and how it interfaces with the rest of the assembly. If the piece must bear a load, contain pressure, resist chemicals or meet a particular standard, state that explicitly. Do not use an informal sketch as a substitute for engineering requirements that your application needs.
A common mistake is describing stainless steel as though every grade has the same properties. Another is assuming a photograph communicates tolerances or proves a connection will fit. Give Tom the information you have and flag uncertainty rather than guessing. Where design calculations, regulated approvals or another specialist’s sign-off are required, confirm who is responsible before fabrication is agreed. This page does not promise that every proposed item is suitable for workshop production.
From enquiry to completion
A clear next step at every stage
- 1
Tell Tom what you need
Start with the vehicle or project details and the result you want. For vehicle work, include make, model, year, engine and known modifications. Photographs can help explain the initial enquiry, but flag uncertainty about existing parts or condition rather than guessing. All custom quotes are free.
- 2
Clarify the scope and quote
Discuss which work or product you need and what information is required to confirm it. Ask what is included, what remains outside the scope and which terms apply. Published starting prices are guides to the named services, not fixed prices for every vehicle or an assurance that additional work is included.
- 3
Agree an appointment or order
Workshop visits are strictly by appointment; there are no walk-ins. For workshop work, agree the arrangements with Tom before travelling or leaving a vehicle. For manufactured parts, confirm price, availability and fulfilment directly. No deposit, payment schedule or delivery promise has been supplied for publication.
- 4
Complete the agreed work
The work follows the scope agreed for your vehicle or project. Ask Tom about any inspection, fitment checks or verification relevant to that scope rather than assuming every service includes the same test. If unexpected condition issues affect the job, the next work should be discussed rather than treated as automatically included.
- 5
Discuss handover and ongoing care
Confirm collection, any care instructions and applicable terms before handover. Lifetime warranty availability concerns custom stainless exhaust builds only, not every service or manufactured component. Workshop work takes place Monday to Friday; weekend drop-off and collection can be arranged in advance, but weekend work is not offered.
What matters to you
Practical reasons to plan it properly
Deal with the fabricator directly
Tom is the solo owner-operator, so enquiries go to the person responsible for the workshop work. That keeps application questions close to the proposed fabrication rather than hidden behind a generic product listing.
Match requirements to a quotation
Custom quotes are free. Ask what materials, operations and supplied information are included; no universal price or turnaround is advertised for components with very different purposes and complexity.
The detail behind the decision
Materials, joining and the intended environment
Stainless grades differ in their properties and welding requirements. The appropriate choice depends on the application, surrounding materials and conditions of use. Wardale’s supplied brief does not name a default grade for every fabrication project, so confirm the proposed material in the quote. If your design requires a particular specification, state it and provide the relevant documentation rather than assuming any stainless stock is interchangeable.
Joint preparation, filler selection and control of heat matter in stainless welding. Tom’s thin-wall stainless tube codings are relevant supplied credentials, but the specific joining method for your part should be discussed. Finish requirements also need definition: a practical workshop component and a prominently visible item may have different expectations. No universal polished finish or surface-treatment process is promised for every fabricated item.
Private projects and commercial requirements
For a private project, bring measurements, a reference piece or a clear explanation of the problem you are solving. For a commercial enquiry, include drawings, quantities, material requirements and any inspection or documentation obligations. These differences concern the brief, not a claim that Wardale has certifications for every commercial application. Ask whether the proposed work fits the workshop’s capability before arranging delivery of parts or materials.
Confirm responsibility for design and verification. Fabricating a component to agreed information does not by itself certify the design for all loads, temperatures or regulated uses. If another specialist needs to approve it, identify that requirement early. Likewise, material supplied by a customer may need its identity and condition confirmed. A useful quote describes the scope, inputs and limitations, rather than leaving critical questions until the completed piece is ready to collect.
Before sending drawings, check that dimensions have units and that critical interfaces are identifiable. Mark which information is confirmed and which needs clarification. If you are asking for multiple items, state the quantity rather than assuming the quote concerns a production run. Include whether materials are to be supplied by you or discussed as part of the job. This page does not promise design calculations, certification or a particular production capacity. A clear enquiry allows those boundaries to be discussed early, so the proposed component is quoted for an understood purpose instead of remade after a missing requirement comes to light.
Further guidance
Stainless material and welding considerationsYour questions answered
Before you book or enquire
How much does bespoke stainless fabrication cost?
No general fabrication price list or rate has been supplied. Custom quotes are free and depend on the item, material requirements and agreed scope. Send dimensions, drawings or reference information and explain the application so Tom can discuss a quotation for the actual work.
Can you make pressure, structural or food-contact components?
Those specific approvals and capabilities have not been supplied. Describe the application and required standards to Tom before proceeding. His welding qualifications are confirmed, but they should not be treated as blanket certification for every regulated product or design.
How long does it take, and when can I book?
No fixed lead time or turnaround has been supplied for this work. Ask Tom about current availability and the expected arrangements for your specific enquiry before planning travel. Workshop visits require an agreed appointment; sending an enquiry is not confirmation of a booking or a completion date.
What information should I send for an enquiry?
For vehicle work or parts, send the make, model, year, engine, known modifications and what you need changed. For fabrication, include dimensions or drawings and the intended use. Describe existing damage or uncertainty honestly; photographs are useful context, not a substitute for any assessment needed to confirm suitability.
Does this service include a lifetime warranty?
A lifetime warranty is available only on custom stainless exhaust builds; it does not apply to this service or manufactured parts. Specific terms for this enquiry have not been supplied. Ask Tom which conditions and cover apply before proceeding rather than treating a general workshop statement as a guarantee.
How long will the result last?
No fixed service-life figure has been supplied. The application, condition, use and ongoing care affect what is appropriate to expect. Ask about the proposed material or treatment and any relevant maintenance. A starting price or warranty statement should not be read as a promise that the result never needs checking.
Do you offer emergency work or walk-in appointments?
There are no walk-ins and no published emergency or same-day service promise. Contact Tom to ask about availability. If a vehicle has fumes, insecure components or another safety concern, do not keep driving on the assumption that an enquiry guarantees an immediate repair slot.
Where is the workshop, and can I visit at the weekend?
Wardale Engineering is at Unit 4, Burton Cliff Farm, Middle St, Lincoln LN1 2RG. Hours are Monday to Friday, 7am–6pm, strictly by appointment. There is no weekend work; weekend vehicle drop-off and collection may be arranged beforehand. Agree access with Tom before setting out.
Serving Lincolnshire
All workshop visits take place in Lincoln, by appointment.
Free quotes on all custom work
Turn your fabrication requirement into a clear quote
Send the vehicle or project details and the result you want. Tom can discuss the appropriate scope and next arrangements; there is no need to guess a product specification or arrive without an appointment.
Free custom quotes. Deal directly with Tom. Workshop visits by appointment only.